How can I set up the XBOX 360 controller for use during a Splashtop remote connection?

You can now use the XBOX 360 controller during Splashtop remote connections.  Please refer to the steps listed below to set it up.

  1. Please make sure the XBOX 360 controller's driver for Windows is installed properly on the target PC.  (You can just plug your XBOX 360 controller into the target PC, then run Windows Update to install the driver.)
  2. Run cmd.exe as Administrator on the target PC.  (You can find cmd.exe then right-click on it to run it as Administrator.)
  3. Go to the XBOX 360 controller's driver for Splashtop folder by typing:
    cd  c:/Program Files  (x86)/Splashtop/Splashtop Remote/Server/Driver/GamePad/
    and then press <Enter>.
  4. Run the XBOX 360 controller's driver for Splashtop by typing:
    and then press <Enter>.
  5. Restart the Streamer on the target PC.
  6. Build a Splashtop remote connection and plug your XBOX 360 controller into a device running the Splashtop client app.  The XBOX 360 controller will work.


note.gif  NOTES:

  • This function is now only supported during Splashtop remote connections from Splashtop clients for Android and Windows to target computers running Windows.
  • Please use Streamer v2.4.5.0 or later version.
  • Please use the commands "cd c:/Program Files/Splashtop/Splashtop Remote/Server/Driver/GamePad/" and "install_driver.bat" in Step 3 and 4 if using a 32-bit operating system platform.
  • If you have trouble using the XBOX 360 controller on the target computer, please refer to

    for more help.

0 out of 1 found this helpful