With the new technology to blank the remote screen, there is not a driver installation needed and it will work in most of the cases, except for some limitations listed as below.
- On Windows 1903 machines, a system reboot or display change (e.g., change resolution or disable/enable display) might be needed before it can work.
- Will not work on some computers with gen 1 or 2 Intel CPU which still with HD graphics.
- Will not work on some computers with a monitor connected using a USB port (e.g., USB to VGA switch), installing the driver of the switch might resolve the issue.
- When connecting to a computer which just woke up from Hibernate/Sleep state, it will not work at the first connection. It should work going forward.
- Switching Windows users or logging off/in a Windows user during a remote session will turn the remote screen on then back off again.
- Some display auto-adaptation software might turn the remote screen back on, e.g., f.lux, Asus Splendid Eye Care (a built-in software with Asus laptop).
You can refer to the article for a workaround for some of the above limitations: link.
On Mac, open Splashtop Streamer from the Applications folder or from the dock. Then click on the "Security" tab
- The mouse shows on host/streamer computer.
- On some macOS 10.14 or later machines, checking Enable Blank Screen feature might cause some windows or toolbar to only show blank.